8.2 Einige ReinigungsmittelÖl und F

8.2 Einige Reinigungsmittel
Öl und Fett kann mit einem wasseremulgierenden Öllösungsmittel (BP-System) entfernt
werden.
Organische und Fettablagerungen können mit Natronlauge (NaOH) mit einer maximalen
Konzentration von 1,5 % - max. Temperatur 85° C - entfernt werden. Mischung für eine 1,5
%ige Konzentration = 5 l 30 % NaOH pro 100 l Wasser.
Stein und Kalkstein können mit Salpetersäure (HNO3) - maximale Konzentration 1,5 % -
max. Temperatur 65° C entfernt werden.
Mischung für eine 1,5 %ige Konzentration = 2,4 l HNO3 62 % pro 100 l Wasser.
Salpetersäure hat ebenfalls einen beeinträchtigenden Aufbaueffekt auf den Passivationsfilm
des nichtrostenden Stahls.

Results (English) 1:

8.2 some cleaning suppliesOil and grease can be removed with a water-emulsifying solvent (BP-system)be.Organic and grease can with sodium hydroxide (NaOH) with a maximumConcentration of 1.5% - maximum temperature 85 ° C – are removed. Mix for a 1.5% Concentration = 5 l 30% NaOH per 100 l water.Stone and limestone can with nitric acid (HNO3) - 1.5% - maximum concentrationmaximum temperature 65 ° C are removed.Mix for a 1.5% concentration = 2.4 l HNO3 62% per 100 l water.Nitric acid also has a debilitating effect of structure on the Passivationsfilmof the stainless steel.

Results (English) 2:

8.2 Some detergent
oil and grease can with a wasseremulgierenden oil solvent (BP System) away
be.
Organic and fatty deposits can with sodium hydroxide (NaOH) at a maximum
concentration of 1.5% - max. Temperature 85 ° C - are removed. Mixture for a 1.5
.% Concentration = 5 l 30% NaOH per 100 liters of water
stone and limestone can with nitric acid (HNO3) - maximum concentration 1.5% -
max. Temperature 65 ° C are removed.
Mixture for a 1.5% concentration = 2.4 l HNO3 62% per 100 liters of water.
Nitric acid also has a debilitating effect on the structure of passivation film
of stainless steel.

Results (English) 3:

8.2 some cleaning productsoil and fat with a wasseremulgierenden öllösungsmittel (bp) system from.organic and deposits with sodium hydroxide solution (naoh) with a maximumconcentration of 1.5% max. temperature of 85 c are removed. mixture for a 1.5percent concentration = 5 l 30% naoh per 100 l of water.stone and limestone with nitric acid (hno3) - maximum concentration 1.5%max. temperature of 65 degrees c are removed.mixture for a 1.5% concentration = 2.4 l hno3 62% per 100 l of water.nitric acid also has an affect on the passivationsfilm aufbaueffektof the stainless steel.